Return to forums
Register new account
Login:

Mclaren Power Forums: Slip Ring Frequently Asked Questions - Mclaren Power Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Slip Ring Frequently Asked Questions

#1
User is offline   xysoom 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 5,848
  • Joined: 21-May 20
Slip Ring Frequently Asked Questions


What kind of materials are used in slip ring contacts?To get more news about slip ring material, you can visit grandslipring.com official website.

A wide range of materials have been adopted in slip ring designs, these materials can vary over the type of slip ring. Usually, the contacting surfaces are made of precious metal alloys such as gold or silver.

Can Slip Rings transmit high-speed DATA?

The transmission of high-speed data is available in many slip ring types.

Can I run EtherCAT/Profibus/Profinet/USB/Cat5/Cat6 with slip rings?

Lots of options are available for transferring power and data with electrical slip rings such as EtherCAT/Profibus/Profinet/USB/Cat5 and Cat6. To choose the proper type and value for your application please contact our sales department. For more visit our website.

Why do we use slip rings in motors?

The reason why we are using slip rings in motors is to bring resistance to rotor windings. Increasing resistance in the rotor windings makes the rotor current more in contact with the stator current. The result is high torque generation with relatively low current. When the rotor reaches its nominal speed, the devices are shorted, making the brushes to be out of contact, and the engine starts operating as a primary AC induction motor.
The main distinction between the two devices is that while a slip ring is applied in conducting power from a static to a moving part while, a split ring is adopted for DC equipment to change the flow of the current. On the other hand, the design of the slip ring is can be described as a continuous circular ring with brushes on its outside layer while a split ring is from the middle to form two halves. While slip rings are used in AC generators, split rings are needed for DC generators.

What is the use of slip rings in AC generators?

AC generator is a machine that converts mechanical energy into electrical energy by using the rule of electromagnetic induction. The AC Generator’s input supply is mechanical energy supplied by steam turbines, gas turbines, and combustion engines. The output is alternating electrical power in the form of alternating voltage and current. Slip rings are used to connect the rotating part of AC machines to exterior circuits.
Why do we need slip rings instead of commutators?
Slip rings and commutators are both used to the transmission of electrical current flow between fixed and rotating parts. However, the main difference between the two is that commutators convert AC to DC and vice versa while a slip ring only ensures a connection between these parts.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users