[xysoom]

How Deep to Bury Underground Warning Tape



It is recommended that underground warning/marking tape be buried at a depth of 12 in (30 cm) or less below grade. The minimum distance from the top of the pipeline should be 12 in (30 cm), with 24 in (60 cm) -36 in (90 cm).To get more news about Underground Warning Tape, you can visit senpinghz.com official website.

Each run of underground warning/marking tape must be overlapped by a minimum of 20 ft (6 m) or must be joined.
For a complete installation guide, check out our installation sheet for Signaltape® underground warning tape.
Non-detectable aboveground and/or underground warning tapes for construction areas and other manufacturing facilities to prevent accidents by increasing visibility of hazards.

Heavy-duty non-adhesive tapes withstand exposure to harsh weather and act as a constant safety warning to pedestrians and workers.

Highly visible, non-detectable warning tapes are resistant to oil and corrosion, comes with high-quality linear low-density Polyethylene (PE).
Lapwing stock a comprehensive range of specialist tapes for the construction industry. The ever popular cloth duct (or gaffer) tapes are stocked in a range of colours and sizes, along with specialist tapes for the utilities and civil engineering sectors. A comprehensive range of underground warning tapes, both plain and detectable are stocked along with electrical tile tapes. Double sided butyl tapes for DPM's and insulation tapes for electrical use are also stocked along with hazard and barrier tapes!