In appearance, these radiators are difficult to distinguish from radiators made of aluminum.
Page 1 of 1
Bimetallic radiators
#2
Posted 18 October 2022 - 07:48 PM
But most importantly, it is what is contained inside these radiators. Inside the aluminum housing is integrated a strong metal filling. Thanks to these design features, there is a combination of the low weight of aluminum and the strength of the steel material.
Bimetallic radiators are characterized by a high heat output. On average one section has a capacity of 170-194 W (For radiators with a width of 80mm and center distance of 500mm) go to www.radiatoroutlet.co.uk.
Bimetal radiators can be installed in any heating system (independent, central, with plastic or steel pipes)
Bimetallic radiators are characterized by a high heat output. On average one section has a capacity of 170-194 W (For radiators with a width of 80mm and center distance of 500mm) go to www.radiatoroutlet.co.uk.
Bimetal radiators can be installed in any heating system (independent, central, with plastic or steel pipes)
#3
Posted 18 October 2022 - 07:49 PM
The only disadvantage of bimetal monolithic heating radiators is their relatively high cost.
Share this topic:
Page 1 of 1